Mantle Network Airdrop Guide

Step by Step Guide to Secure an Airdrop

Links & Resources

Website: https://www.mantle.xyz/
About: https://docs.mantle.xyz/network/introducing-mantle/a-gentle-introduction
Faucet: https://faucet.testnet.mantle.xyz/
Bridge: https://bridge.testnet.mantle.xyz/
Discord: https://discord.com/invite/0xMantle
Twitter: https://twitter.com/0xMantle
Telegram: https://t.me/mantlenetwork
GuildXYZ: https://guild.xyz/mantle
Zealy: https://zealy.io/c/mantle/invite/hOHA_FLjVcX18Krdt8Zrw
Mirror: https://mirror.xyz/0xMantle.eth

This article contains some affiliate links which may earn us a commission at no additional cost to you.

Step By Step Guide

Airdrop: Unconfirmed but expected
Stage: Testnet
Investment Required: $5–10 USD
Complexity: 3/5
Time: Allow 30–45 minutes to complete actions first time. Repeat testnet actions 3–4 times per week, allowing 10 minutes to complete the actions. Do Zealy quests daily or weekly depending on their frequency and to check for new available quests when launched.

Join Socials

• Join Discord (recommended) for project updates and discussion, e.g. troubleshooting the Blast Off campaign with other server members.
• Follow Twitter (not compulsory) for project updates.
• Join Telegram (not compulsory) for project updates.
• Join Guild (recommended) for Discord roles — this requires you have an Ethereum wallet to link (no transaction required, just signing to show it’s your wallet) and a Discord profile to link (at the least). Once you link your wallet click on Join Guild To Get Rewards then Join. You will get roles in the Discord server when you meet the criteria required for each role.
• Follow on Zealy to complete their quests and gain experience points.
• Subscribe on Mirror (when a new article is released you can mint the article as an NFT for a small gas fee although this is limited to the first 500 people)

This guide assumes the following

• You have MetaMask installed and have setup a wallet
• You have funded your wallet (with ETH or a stablecoin such as USDT that you can convert to ETH using the Swap function in MetaMask)
• You understand how to use MetaMask
• You understand the difference between signatures and transaction approvals in MetaMask
• You understand gas fees
• You understand how to swap and bridge tokens to different blockchains
• You have installed some or all of the extensions from our article to keep you safe while you carry out your airdrop farming activities

If any of the above assumptions are confusing, please do more research and familiarise with these concepts before you continue with ANY airdrop farming activities.

Add Goerli and Mantle testnet Networks to MetaMask

• Add Mantle test network to your MetaMask wallet from here https://chainlist.org/chain/5001
• Click Connect Wallet
• Approve the signature request to connect your wallet in MetaMask pop up
• Click Add to MetaMask
• Approve signature request in MetaMask pop up
• Add Goerli test network to your MetaMask wallet from here https://chainlist.org/chain/5
• Click Add to MetMask
• Approve signature request in MetaMask pop up

Get gETH tokens on Goerli testnet

If you already have enough gETH on Goerli then you can skip this step.

Option 1 — bridge ETH from ETH mainnet to gETH on Goerli testnet

• You will require ETH on mainnet to do this — some for bridging and some for the gas fee
• Aim to do this when gas prices are at their lowest — install Blocknative browser extension and pin it to see current network gwei level
• Head to https://testnetbridge.com/
• Click connect wallet at the top right of your screen
• Approve the signature request to connect your wallet in MetaMask pop up
• Choose the Ethereum network in your wallet
• Choose ETH on Ethereum in token dropdown
• Input a tiny amount of ETH to bridge, e.g. 0.0005 ETH — you will see this translates to a very large sum of gETH on Goerli testnet
• Click Transfer
• Confirm transaction request in MetaMask pop up
• Your gETH funds should arrive on Goerli testnet shortly
• You should only need to do this once and then you will have enough gETH for months of activity if not more

Option 2 — Use gETH faucets to drip GETH to your wallet on Goerli testnet

Goerli Faucet

• https://goerlifaucet.com/
• Drips 0.02 gETH to your wallet
• Create an account first
• Go back to the faucet page
• Paste your ETH wallet address in the box
• Complete Captcha to prove you’re human
• Click Send Me ETH
• Your gETH funds should arrive on Goerli testnet shortly
• Note, to prevent bots and abuse, the Goerli faucet requires a minimum mainnet balance of 0.001 ETH on the wallet address being used
• You can only claim once every 24 hours

Paradigm Faucet

• https://faucet.paradigm.xyz/

• Drips 0.1 gETH to your wallet
• Click on sign in with Twitter
• Approve the authorisation notification from Twitter to connect your Twitter account

• Paste your ETH wallet address in the box
• Click Claim
• Your gETH funds should arrive on Goerli testnet shortly
• Note, your Twitter account must have at least 1 Tweet, 50 followers, and be older than 1 month.
• You can only claim once every 24 hours

Quicknode Faucet

• https://faucet.quicknode.com/ethereum/goerli

• Drips 0.05 gETH to your wallet (or 0.01 gETH if you share a Tweet)
• Click Connect Wallet
• Choose Connect MetaMask
• Approve the signature request to connect your wallet in MetaMask pop up
• Choose Select Network and select Goerli
• Click Continue
• If you want to double your claim to 0.1 gETH you can click Generate the tweet for me and I’ll share!
• A new tab will open Twitter with a pre-filled Tweet to post
• Click Tweet

• Go into your Tweet and copy the URL from your browser bar
• Close Twitter tab
• Paste the URL into the Tweet URL box on the faucet page
• Click Claim my 0.1 ETH
• If you don’t care about about doubling your claim ignore previous steps and click No thanks, just send me 0.05 ETH

• Your gETH funds should arrive on Goerli testnet shortly
• Note, to prevent bots and abuse, the Goerli faucet requires a minimum mainnet balance of 0.001 ETH on the wallet address being used
• You can only claim once every 24 hours

Option 3 — Use all of the above to maximise your gETH balance on Goerli.

• Note that some Zealy quests for various airdrop require proof of gETH claims on Goerli so make sure you do this at least once

Get testnet MNT tokens on Mantle

You can combine all these options to maximise the amount of testnet MNT you receive. It’s recommended to do this once per day.

Option 1 — via the offical faucet

• Head to https://faucet.testnet.mantle.xyz/

• Click Authenticate to authenticate your Twitter account
• Click Connect Wallet to connect your MetaMask wallet
• Approve the signature request to connect your wallet in MetaMask pop up
• Switch to Goerli testnet in MetaMask
• Keep Mint address the same (unless you want to send the tokens to a different wallet address in which case paste the address)
• Update Mint token amount to 1000 or the maximum it tells you that you can mint (you can mint up to 1000 every 4 hours)
• Click Mint tokens
• Confirm transaction request in MetaMask pop up
• Your MNT tokens should arrive on Goerli testnet shortly
• Note you can only hold a balance of 1000 MNT tokens in your wallet on Goerli tesntnet at anytime so you will need to bridge these tokens to the Mantle testnet before you can mint more MNT tokens. The faucet will warn you of this and you won’t be able to carry out the mint transaction until your wallet is empty of MNT. Bridging MNT from Goerli to Mantle testnet is a weekly task on Mantle’s Zealy questboard.

Option 2 — via the official Discord faucet channel

• Head to https://discord.com/channels/993846798382805002/1064730432777764944
• You will need to be a verified member of the Discord to access this.
• Type: $faucet [INSERT YOUR WALLET ADDRESS]
• Please replace the text in the brackets with your wallet address and do not include the brackets
• Press enter
• Your MNT tokens should arrive on Goerli testnet shortly
• You can only claim once every 24 hours
• This ignores the 1000 MNT wallet limit from Option 1

Option 3 — via FusionX

• Head to https://fusionx.finance/faucet
• Click Connect Wallet top right
• Choose MetaMask
• Follow MetaMask prompt to switch to Mantle testnet if you’re not already on that network
• Click Send Tweet
• A new tab will open Twitter with a pre-filled Tweet to post
• Click Tweet
• Close Twitter tab
• Click Verify Tweet and the page will reload to a Twitter authorisation page
• Click Authorise and the page will reload to the faucet page
• Keep Get Tokens address the same (unless you want to send the tokens to a different wallet address in which case paste the address)
• Complete Captcha to prove you’re human
• Click Get Tokens
• Click Okay

Import the MNT token to your MetaMask asset list

• Open MetaMask extension
• Switch to Goerli testnet in MetaMask
• Click on Assets
• Scroll down and choose Import Tokens
• Paste the MNT contract address: 0xc1dC2d65A2243c22344E725677A3E3BEBD26E604
• Wait for the details to populate
• Click Add custom token
• You will now be able to see your MNT balance under your asset list

Testnet Actions

Bridge MNT from Goerli testnet to Mantle testnet

• Head to https://bridge.testnet.mantle.xyz/

• Click Connect wallet top right
• Switch to Goerli testnet if prompted by MetaMask (click Switch Network)

• Choose Deposit
• Type in 1000 or your total balance of MNT in the input box (a message will show you your total MNT balance below the input box)
• Click Allocate allowance before depositing assets
• In the MetaMask pop up click Max then Next

• Approve transaction request in MetaMask pop up
• A small glitch might mean you need to repeat this process
• Once approved, click Deposit Tokens to L2
• Click Confirm
• Confirm transaction request in MetaMask pop up
• Your MNT tokens should arrive on Mantle testnet within 10 minutes

Withdraw MNT from Mantle testnet to Goerli testnet

• Head to https://bridge.testnet.mantle.xyz/
• Click Connect wallet top right
• Switch to Mantle testnet if prompted
• Choose Withdraw
• Type in 1 or any amount of your balance of MNT in the input box (a message will show you your total MNT balance below the input box)
• Click Withdraw Tokens from L2
• Check the two checkboxes
• Click Confirm
• Confirm transaction request in MetaMask pop up
• Your MNT tokens should arrive on Goerli testnet within 20 minutes

Complete actions on Mantleswap

Swap MNT to USDT

• Head to https://testnet.mantleswap.org/swap
• Click Connect wallet top right
• Switch to Mantle testnet if prompted
• Choose Swap
• Choose MNT from the first token dropdown box
• Note, it may show up as BIT token which was the token code they used in an earlier version of the testnet
• Choose USDT from the second token dropdown box
• Type in any amount of your balance of MNT in the input box (you will be able to see your balance on the right)

• Click Swap
• Click Confirm Swap
• Confirm transaction request in MetaMask pop up
• Click Add USDT to MetaMask

• Click Add token
• Your USDT tokens should appear in MetaMask under Assets shortly

Add Liquidity

• Head to https://testnet.mantleswap.org/swap
• Click Connect wallet top right
• Switch to Mantle testnet if prompted
• Choose Liquidity
• Choose Add Liquidity
• Choose MNT from the first token dropdown box
• Note, it may show up as BIT token which was the token code they used in an earlier version of the testnet
• Choose USDT from the second token dropdown box
• Click Max next to USDT amount

• Click Approve USDT
• In the MetaMask pop up click Max then Next
• Approve transaction request in MetaMask pop up
• Click Confirm Adding Liquidity
• Click Confirm Deposit
• Confirm transaction request in MetaMask pop up
• Click Add USDT to MetaMask
• Click Add token
• Your USDT tokens should appear in MetaMask under Assets shortly

Complete actions on Zonic

Purchase an NFT

• Head to https://testnet.zonic.app/

• Click Connect top right
• Choose MetaMask wallet
• Click on the Mantle logo to the right of Top Collections
• Review the NFT collections that show up and see if any have a floor price that is in line with the amount of MNT you have in your wallet
• Click into a collection
• Click into an NFT
• Click Buy Now
• Confirm transaction request in MetaMask pop up
• Your NFT will arrive in your wallet shortly

List an NFT

• Click Sell NFT
• Input price you want to sell floor, e.g. the floor price
• Choose Duration from dropdown options

• Confirm transaction request in MetaMask pop up
• Click Approve
• Click down arrow in MetaMask pop up
• Click Sign
• You can cancel your listing or lower your price any time. Follow the screen and MetaMask prompts when you click either of these options.

Complete actions on Izumi Finance

You can review Izumi’s guide here: https://mirror.xyz/0x78c1675a2466430CB620F414910BFd6987676A8e/cV8TQSAUC-0HSdOeMVdctiLIs40SEG_Evb8M7Fmivtg

Swap MNT to USDT

• Head to https://mantle.izumi.finance/home
• Click Connect top right
• Choose MetaMask wallet
• Choose Swap from the top menu
• Choose Swap tab
• Choose MNT from the first token dropdown box
• Note, it may show up as BIT token which was the token code they used in an earlier version of the testnet
• Choose USDT from the second token dropdown box
• Type in any amount of your balance of MNT in the input box (you will be able to see your balance on the right)

• Click Swap
• Confirm transaction request in MetaMask pop up
• Your USDT tokens should appear in MetaMask under Assets shortly

Place a Limit Order

• Head to https://mantle.izumi.finance/home
• Click Connect top right
• Choose MetaMask wallet
• Choose Swap from the top menu
• Choose Limit Order tab
• Choose MNT from the first token dropdown box
• Note, it may show up as BIT token which was the token code they used in an earlier version of the testnet
• Choose USDT from the second token dropdown box
• Choose Market Price in USDT Price box
• Type in any amount of MNT in the amount input box (we chose 1000)

• Click Add
• Confirm transaction request in MetaMask pop up
• Your limit order has been placed and will be fulfilled if the price criteria is met

Add Liquidity

• Head to https://mantle.izumi.finance/home
• Click Connect top right
• Choose MetaMask wallet
• Choose Liquidity from the top menu
• Click Add Liquidity
• Click Popular
• Click Custom
• Choose MNT from the first select token dropdown box
• Note, it may show up as BIT token which was the token code they used in an earlier version of the testnet
• Choose USDT from the second token dropdown box
• Choose 0.20% fee tier
• Input 0.46 in the USDT price box

• Click Create Pool
• If an error shows, click Tap slider twice next to the Volume option
• Click Max next to USDT amount
• Click Approve USDT
• Confirm transaction request in MetaMask pop up
• In the MetaMask pop up click Max then Next
• Approve transaction request in MetaMask pop up

Mint your OATs on Galxe:

• Head to https://galxe.com/izumi/campaign/GCBHQUN2B5
• Complete Twitter, Discord and Telegram tasks.
• Click Verify on each task to confirm eligibility.
• You will need to wait for the Izumi tasks to be manually updated by them.
• Bookmark the page and set a reminder to check back until it’s ready.
• Once ready, click the Claim button
• You will require some MATIC on Polygon to mint once you’re eligible to Claim your OAT NFTs
• Approve transaction request in MetaMask pop up

Get BIT Delegate Role

• You must hold at least 10 $BIT on your wallet in ETH Mainnet (see next section)
• Delegate your $BIT to your ETH address on the website: https://delegatevote.mantle.xyz/
• Click Connect Wallet
• Click Send Message to verify your account
• Click Sign In in MetaMask pop up
• Navigate to the Delegate section on the page
• Choose self delegate

• Head to https://snapshot.org/#/bitdao.eth
• Click Join
• Choose MetaMask when connect wallet comes up (or the wallet option you use)
• When a vote is available, participate in at least 1 vote
• After fulfilling all of the above conditions, connect to https://guild.xyz/mantle to get a role (allow some time for this role to be applied in Discord)
• This will also allow you to complete a quest on Zealy.

Purchase 10 BIT and add to your mainnet Wallet

This step is required to enable you to:

• Complete a Zealy quest
• Get BIT Holder Guild role for Discord (1 BIT required)
• Get BIT Delegate Guild role for Discord (10 BIT required)
• Vote in a BITDAO proposal regarding Mantle

WARNING. This step involves you spending your mainnet crypto. It is not a compulsory step so if you’re not comfortable with this and don’t care about roles or voting, you can skip this step.

Option 1 — purchase BIT from a CEX where it is available to buy on spot

• A list of available markets can be found here: https://coinmarketcap.com/currencies/bitdao/markets/

Option 2 — swap some of your mainnet crypto to BIT by BITDAO

• Use the MetaMask Swap feature
• Wait until gwei is low
• Open MetaMask extension and choose the Swap feature
• Choose the token you will swap from, e.g. ETH
• Enter token amount, e.g. 0.003
• Choose the token you will swap to: BIT by BITDAO

• Click review swap
• Ensure you are receiving a minimum of 10 BIT
• If you want to adjust it click Edit under the MetaMask logo on the pop up
• Once you’re happy with the amount, click Swap
• Your BIT tokens should appear in MetaMask under Assets shortly

Complete Quests on Zealy

• Head to Zealy: https://zealy.io/c/mantle/invite/hOHA_FLjVcX18Krdt8Zrw
• Click Connect in the top right of the screen
• You can choose to connect with your MetaMask wallet or your Discord account
• If you choose Discord you will be taken to an authorisation page. Click authorise and the Zealy page will reload.
• If you choose MetaMask you will need to approve the signature request to connect your wallet in MetaMask pop up
• Once connected, you will need to join the Mantle Discord and verify before you can complete any quests
• Once verified you can work through each quest by completing the step and then clicking Claim on each quest
• It will verify you have completed the steps and award you experience points or submit to the team for review
• Some quests are one offs, e.g. in the Getting Started section you need to follow their socials
• Some quests are repeated daily or weekly
• For help and support with quests you can ask questions in their Discord in the dedicated zeal-guild-support channel

Explore the Ecosystem

• Head to https://www.mantle.xyz/ecosystem
• Scroll down to the Explore all dApps section
• Use the filters to find different type of dApp
• Click on the link icon on any dApp you’re interested in to check it out
• Some you can interact with, e.g. gaming and de-fi and some are more early stage for now

Congratulations! You’ve finished the guide and are one step closer to an airdrop! Keep your eye on the Discord and Zealy for updates on new quests, mainnet dates and more.

Please note that investing in crypto carries a high level of risk and is speculative in nature. The content of this article should not be considered as a recommendation from Droppables or the author to invest in crypto. Droppables does not provide any guarantees regarding the accuracy or timeliness of the information presented in this article. It is important to consult with a qualified professional who can assess your specific circumstances before making any financial decisions.p by Ste